Barkers Mesh Systems

Excellent rigid panel system increased protection against cut through, ideal for use in schools, commercial outlets and good alternative on industrial sites where other products are not suitable.

A rigid type system providing an excellent visual appearance. Its aesthetic look is especially popular with Architects and Specifiers. Manufactured to BSEN 1722 Part 14 Cat 2 & 3.

Standard Sizes

Panels			Posts
				Total number of fixings
				Inters	Corners
Fence height mtrs	Panel size H & W	Wire diameter V & H mm	Post centres mm	Profix Twin per bay	Profix Twin per bay
1.2	1284 x 2520	6 x 8	2520	1	2
1.8	1884 x 2520	6 x 8	2520	1	2
2	2084 x 2520	6 x 8	2520	1	2
2.4	2484 x 2520	6 x 8	2520	1	2

Heights above the standard range can be achieved using a multi-lift system.

Panels

Manufactured using 6mm vertical and 2no 8mm horizontal wires welded at each intersection creating a strong and durable panel, the mesh aperture consists of a 200 x 50mm mesh spacing providing excellent see through visibility!

Post System

Standard posts are manufactured from 60 x 60 x 2.5mm Rolled Hollow Section. All posts include threaded inserts, leaving a clean and flush design to the rear face. PROFIX Twin is a specially designed clamping assembly that secures the panels in place.

Applications

The TWINGUARD system is suitable for most applications were general site demarcations is required typical examples are uses in schools, public areas, industrial sites and retail outlets.

Gates

Standard gates are available or tailored-made to suit your requirements. All gates are supplied with rear hung adjustable hinges, pad-lockable drop-bolts, multi-holed to suit site conditions complete with anti-climb PROTECTORGATE slide latch. See our gate range for further details.